Toyota Corolla 2010 Owner's Manual

Toyota Corolla 2010 Sedan manual cover
Pages 476
Year 2010
Language(s)
English en

Toyota Corolla 2010 Sedan Specification

The 2010 Toyota Corolla Sedan is a compact car known for its reliability, fuel efficiency, and practical design. It is powered by a 1.8-liter four-cylinder engine that produces 132 horsepower and 128 lb-ft of torque, paired with either a five-speed manual transmission or a four-speed automatic transmission. The vehicle features front-wheel drive, ensuring stable handling and a smooth driving experience. The 2010 Corolla offers impressive fuel efficiency, with EPA ratings of approximately 26 mpg in the city and 34 mpg on the highway.

In terms of dimensions, the Corolla measures 178.7 inches in length, 69.3 inches in width, and 57.7 inches in height, with a wheelbase of 102.4 inches. The interior is designed to comfortably seat five passengers, offering 92 cubic feet of passenger volume and 12.3 cubic feet of trunk space. The cabin features straightforward controls, quality materials, and options for upgraded upholstery and trim.

Safety is a key focus for the 2010 Corolla, equipped with standard features such as anti-lock brakes (ABS), front-seat side airbags, full-length curtain-type airbags, and active front head restraints. The vehicle also incorporates stability and traction control systems to enhance driving safety under various conditions. Additionally, the Corolla has received favorable crash-test ratings from the National Highway Traffic Safety Administration (NHTSA) and the Insurance Institute for Highway Safety (IIHS).

Standard features across the Corolla lineup include air conditioning, a tilt-and-telescoping steering wheel, and a four-speaker AM/FM/CD audio system with an auxiliary audio jack. Higher trim levels offer additional amenities such as power accessories, cruise control, keyless entry, and an upgraded audio system with Bluetooth connectivity. Overall, the 2010 Toyota Corolla Sedan blends efficiency, safety, and practicality, making it a solid choice for drivers seeking a dependable compact car.

Toyota Corolla 2010 Sedan F.A.Q.

How do I reset the maintenance light on a 2010 Toyota Corolla?

To reset the maintenance light on your 2010 Toyota Corolla, turn the ignition switch to the "ON" position. Ensure the odometer is set to "ODO" mode. Turn the ignition switch to "OFF." Press and hold the trip reset button, then turn the ignition switch back to "ON" while holding the button. The maintenance light should begin to flash and then go out. Release the button.

What type of oil is recommended for a 2010 Toyota Corolla?

Toyota recommends using SAE 5W-20 or 0W-20 oil for the 2010 Corolla. It is important to use oil that meets the ILSAC GF-4 or GF-5 quality standards for optimal performance and efficiency.

How do I replace the cabin air filter in a 2010 Toyota Corolla?

Open the glove box and remove any contents. Unhook the damper on the right side of the glove box. Press in on both sides of the glove box to release it from the dashboard. Locate the cabin air filter cover behind the glove box, remove the cover, and slide out the old filter. Insert the new filter with the airflow arrows pointing in the correct direction. Replace the cover, reattach the damper, and close the glove box.

What are the common causes of a check engine light in a 2010 Toyota Corolla?

Common causes for a check engine light in a 2010 Toyota Corolla include a loose or faulty gas cap, a malfunctioning oxygen sensor, a failing catalytic converter, a faulty mass airflow sensor, or defective spark plugs/wires. It's recommended to use an OBD-II scanner to diagnose the specific issue.

How can I improve the fuel efficiency of my 2010 Toyota Corolla?

To improve fuel efficiency in your 2010 Toyota Corolla, ensure regular maintenance such as timely oil changes and air filter replacements. Keep your tires properly inflated, drive at steady speeds, and avoid rapid acceleration and heavy braking. Reducing excess weight from the vehicle can also help.

What is the recommended tire pressure for a 2010 Toyota Corolla?

The recommended tire pressure for a 2010 Toyota Corolla is typically 32 psi for both front and rear tires. However, it is always advisable to check the sticker on the driver's side door jamb for the most accurate information.

How do I replace a headlight bulb in a 2010 Toyota Corolla?

To replace a headlight bulb in a 2010 Toyota Corolla, open the hood and locate the back of the headlight assembly. Disconnect the power connector from the bulb. Remove the rubber boot by pulling it off. Release the bulb retaining clip and remove the old bulb. Insert the new bulb, secure the clip, replace the rubber boot, and reconnect the power connector.

Why is my 2010 Toyota Corolla making a squealing noise when I start it?

A squealing noise when starting your 2010 Toyota Corolla is often due to a worn or loose serpentine belt. Check the belt for wear or damage and ensure it is properly tensioned. Replacing the belt may resolve the issue.

How do I program a new key fob for my 2010 Toyota Corolla?

To program a new key fob for your 2010 Toyota Corolla, insert the existing key into the ignition and turn it to "ON," then back to "OFF." Remove the key. Within 40 seconds, press and release the lock and unlock buttons on the new fob simultaneously. Immediately after, press and hold the lock button for about 2 seconds. The door locks should cycle to indicate successful programming.

What is the towing capacity of a 2010 Toyota Corolla?

The 2010 Toyota Corolla is not designed for heavy towing. The recommended towing capacity is up to 1,500 pounds, but it is advisable to consult the owner's manual and consider the vehicle's condition before towing.