Toyota Camry HV TVIP V5 RS3200 PLUS 2010 Owner's Guide
![Toyota Camry HV TVIP V5 RS3200 PLUS 2010 Sedan manual cover](/images/GZeTzjcDceVAmAyAIFQYvYWj/thumbs/thumb175x175.webp)
To reset the maintenance light, turn the ignition to the "ON" position. Press the odometer button until "Trip A" is displayed. Turn the ignition off, press and hold the odometer button, and turn the ignition back to "ON" without starting the engine. Hold the button until the maintenance light turns off.
The recommended oil for a 2010 Toyota Camry HV is SAE 0W-20 full synthetic oil for optimal performance and efficiency.
The hybrid system warning light may indicate an issue with the hybrid battery or system. It is advisable to have the vehicle diagnosed by a certified Toyota technician to identify and resolve any underlying problems.
To improve fuel efficiency, ensure regular maintenance, keep tires properly inflated, use cruise control on highways, and drive smoothly by avoiding rapid acceleration and heavy braking.
The "Check Hybrid System" message usually indicates a malfunction in the hybrid system. It is recommended to visit a Toyota service center to have the vehicle checked and any necessary repairs performed.
The air filter should be checked every 15,000 miles and replaced every 30,000 miles, or more frequently if you drive in dusty or harsh conditions.
Symptoms of a failing hybrid battery may include reduced fuel economy, the vehicle not holding a charge, unusual engine noises, or warning lights on the dashboard.
To manually unlock the trunk, use the physical key inside your key fob. Insert it into the keyhole located on the trunk lid and turn it to unlock.
A rough idle could be due to a dirty throttle body, a faulty spark plug, or a clogged fuel injector. It is advisable to perform a diagnostic check or consult a professional mechanic for further inspection and troubleshooting.
To replace the cabin air filter, open the glove box, remove the damper, and push in both sides of the glove box to lower it completely. Locate the air filter cover, unclip it, and replace the old filter with a new one. Reassemble everything in reverse order.