Toyota Camry HV 2011 Owner's Manual
![Toyota Camry HV 2011 Sedan manual cover](/images/XnNWuSJHtIbgAZOCduiroMdv/thumbs/thumb175x175.webp)
To reset the maintenance required light, turn the ignition switch to the "ON" position. Press the trip meter reset button until "Trip A" is displayed. Turn the ignition switch off, and while pressing the trip meter reset button, turn the ignition switch back to "ON". Hold the button until the trip meter reads "000000".
The 2011 Toyota Camry HV requires synthetic SAE 0W-20 oil for optimal performance and fuel efficiency.
To improve fuel efficiency, ensure regular maintenance is performed, keep tires properly inflated, use the ECO mode, avoid excessive idling, and drive at moderate speeds.
The recommended tire pressure for the 2011 Toyota Camry HV is typically 33 psi for both front and rear tires. Check the tire information label on the driver's door jamb for confirmation.
To pair your phone, turn on the Bluetooth on your phone. Press the "Setup" button on the car's console, select "Bluetooth", and then "Add New Device". Select the Camry's system from your phone's Bluetooth menu and follow the prompts to complete pairing.
Common causes include a malfunctioning battery, issues with the inverter, or faulty sensors. A diagnostic check at a certified service center is recommended to pinpoint the exact issue.
The hybrid battery generally requires minimal maintenance, but it's advisable to have it inspected every 5,000 to 10,000 miles during regular service appointments to ensure optimal performance.
If the vehicle won't start, check the 12-volt battery for charge, ensure the hybrid system is operational, and verify that the brake pedal is fully depressed while pressing the "Power" button. If issues persist, consult a professional mechanic.
Yes, the 2011 Toyota Camry HV is designed to run on regular unleaded gasoline with an octane rating of 87 or higher.
To change the cabin air filter, open the glove box and remove the limiting stop arm. Squeeze the sides of the glove box together to lower it completely. Remove the filter cover behind the glove box, slide out the old filter, and insert a new one, ensuring it is oriented correctly with the airflow arrows.