Toyota Camry 2023 Owner's Manual
![Toyota Camry 2023 Sedan manual cover](/images/msdbjAQdhEbZdURALdvhYRTs/thumbs/thumb175x175.webp)
To reset the maintenance light, turn the ignition to the "ON" position without starting the engine. Use the trip meter button to select "Trip A," turn the ignition off, then hold the trip meter button. Turn the ignition back to "ON" and continue holding the button until the maintenance light turns off.
The 2023 Toyota Camry typically requires SAE 0W-20 synthetic oil for optimal performance and fuel efficiency. Always check the owner's manual for the most accurate information.
To connect your smartphone, enable Bluetooth on your phone and the car's infotainment system. Select your car's Bluetooth name on your phone and follow the on-screen instructions to pair the devices.
First, check the battery connections for corrosion or looseness. Ensure the battery is charged. If the issue persists, consult the owner's manual for troubleshooting or contact a professional mechanic.
To improve fuel efficiency, ensure regular maintenance such as oil changes and air filter replacements. Maintain proper tire pressure, avoid aggressive driving, and remove unnecessary weight from the vehicle.
The recommended tire pressure for the 2023 Toyota Camry is generally 35 PSI for both front and rear tires. Verify this with the information on the driver’s side door jamb or owner’s manual.
To replace a headlight bulb, open the hood and locate the back of the headlight assembly. Remove the dust cover, disconnect the electrical connector, and replace the old bulb with a new one. Reattach the connector and dust cover.
If the check engine light comes on, ensure the gas cap is tightly secured. If the light remains on, use an OBD-II scanner to check for error codes or consult a professional mechanic.
It is recommended to change the air filter every 15,000 to 30,000 miles, depending on driving conditions. Refer to the owner's manual for specific guidance.
Activate adaptive cruise control by pressing the cruise control button on the steering wheel. Set your desired speed and distance from the vehicle ahead using the controls. The system will automatically adjust speed to maintain the set distance.