Toyota Avalon 2007 Owner's Manual

To reset the maintenance required light, turn the ignition key to the 'ON' position without starting the engine. Press and hold the odometer reset button. Turn the ignition key to the 'OFF' position, then back to 'ON' while continuing to hold the button. After about 5 seconds, the maintenance light should reset.
The recommended oil type for the 2007 Toyota Avalon is 5W-30. It's important to use the correct oil type to ensure optimal engine performance and longevity.
Start by checking the air conditioning fuse in the fuse box. If it is intact, check the refrigerant level with a gauge. Low refrigerant can cause the AC to not cool properly. Also, examine the AC compressor for any signs of damage or leaks.
The recommended tire pressure for the 2007 Toyota Avalon is typically 30 to 32 PSI for both front and rear tires. Check the sticker inside the driver's door for exact specifications.
To improve fuel efficiency, ensure regular maintenance such as timely oil changes, use the recommended grade of motor oil, maintain proper tire pressure, and avoid aggressive driving. Removing excess weight from the vehicle can also help.
Common causes include a dead battery, faulty starter, or a bad alternator. Check the battery terminals for corrosion, ensure the battery is charged, and listen for any clicking noises which might indicate a starter issue.
It's generally recommended to change the transmission fluid every 60,000 to 100,000 miles. However, consult your owner's manual for specific intervals suited to your driving conditions.
Open the hood and locate the back of the headlight assembly. Remove the power connector and then the rubber cover. Twist the bulb socket counterclockwise to remove it, replace the bulb, and reassemble in reverse order.
Locate the brake fluid reservoir under the hood. The reservoir is usually transparent with maximum and minimum level markings. Ensure the fluid is between these marks. If low, add the recommended brake fluid type.
If the check engine light illuminates, check for loose gas cap as a first step. If the cap is tight, use an OBD-II scanner to read any diagnostic trouble codes or visit a professional mechanic for a thorough diagnosis.