Toyota 4Runner 2020 Owner's Manual
![Toyota 4Runner 2020 SUV manual cover](/images/XlkWagdHqtWKNKrvciVxezez/thumbs/thumb175x175.webp)
To connect your smartphone, use Bluetooth by navigating to Settings > Bluetooth on your phone and selecting the 4Runner's system. Alternatively, you can use Apple CarPlay or Android Auto via a USB connection.
The recommended oil type for the Toyota 4Runner 2020 is SAE 0W-20. It's important to use this oil to maintain engine efficiency and performance.
To reset the maintenance light, turn the ignition to the "ON" position, set the odometer to display "ODO," then turn off the ignition. Hold the trip reset button while turning the ignition back to "ON." The light should reset after a few seconds.
The Toyota 4Runner 2020 has a towing capacity of up to 5,000 pounds, when properly equipped with a towing package.
To replace the battery, open the key fob by using a small flat-head screwdriver. Remove the old battery and replace it with a new CR2032 battery, ensuring the positive side is facing up.
The recommended tire pressure for the Toyota 4Runner 2020 is 32 psi for both the front and rear tires. Always check the tire pressure when the tires are cold.
To improve fuel efficiency, maintain proper tire pressure, perform regular maintenance, avoid aggressive driving, and reduce excess weight in the vehicle.
If the engine overheats, pull over safely, turn off the engine, and let it cool. Check coolant levels and look for leaks. Do not attempt to open the radiator cap while the engine is hot.
To engage 4WD, stop the vehicle and shift the transmission to neutral. Use the transfer case lever or dial to shift from 2WD to 4WD high or low as needed. Return to drive when 4WD is engaged.
It's recommended to inspect the air filter every 15,000 miles and replace it every 30,000 miles, or more frequently if driving in dusty or harsh conditions.