Tower B&M Cordless Desk 370859 Owner's Manual
![Tower B&M Cordless Desk Fan 370859 manual cover](/images/985131524aa2e2c78746edd0/thumbs/thumb175x175.webp)
To assemble the fan, first attach the base to the fan body by aligning the grooves and securing it with the provided screws. Ensure the fan head is properly clicked into place before operation.
To clean the fan blades, turn off the fan and remove the front grille by unscrewing it. Use a soft cloth dampened with mild soap and water to wipe the blades. Ensure the blades are completely dry before reassembling the grille.
To improve battery life, avoid overcharging and completely depleting the battery. Charge the fan only when necessary and store it in a cool, dry place when not in use.
If the fan doesn't turn on, check for any obstructions in the fan blades, ensure the battery is correctly installed, and try resetting the fan by holding the power button for a few seconds.
To change the speed settings, press the speed button located on the control panel. The fan usually has multiple speed settings that can be cycled through with each press.
If the fan makes a rattling noise, ensure all screws are tightened and the fan is placed on a stable surface. Check for any loose parts or debris inside the fan that may need removal.
To ensure quiet operation, regularly clean the fan blades and grille. Make sure the fan is placed on an even surface and all parts are securely fastened.
It is generally safe to use the fan while charging, but doing so may extend the charging time. Refer to the user manual for specific instructions regarding simultaneous use and charging.
For optimal performance, clean the fan blades and grille regularly, check the battery health, and store the fan properly when not in use. Periodically inspect the fan for any wear and tear.
To reset the fan, turn it off and disconnect the battery for a few minutes. Reconnect the battery and turn the fan back on. If the issue persists, consult the user manual for further troubleshooting steps.