Thomson WTT5511I User Manual
![Thomson WTT5511I Washing Machine manual cover](/images/vqoUicFMhREUXRkFGRCmAlPN/thumbs/thumb175x175.webp)
To reset the Thomson WTT5511I washing machine, unplug the machine from the power source, wait for about 1-2 minutes, and then plug it back in. This should reset the machine's electronics.
Ensure that the door is properly closed and the power cord is plugged in. Check the fuse or circuit breaker for any issues and ensure water supply is turned on.
Locate the filter at the bottom front of the machine. Open the access panel, unscrew the filter cap, and remove any debris. Rinse the filter under running water before reinstalling it.
Error code E3 indicates a drainage problem. Check if the drain hose is kinked or blocked and ensure the drain pump is functioning properly.
Ensure that the load is balanced and not overpacked. Use the appropriate cycle for the type of fabric and consider using a mesh laundry bag for delicate items.
Run a maintenance wash once a month using a hot cycle and a cup of white vinegar or a washing machine cleaner to keep the drum and pipes clean.
Ensure that the machine is level and the load is balanced. Check for any transport bolts that may not have been removed during installation.
Add fabric softener to the designated compartment in the detergent drawer, following the manufacturer's instructions for the correct amount.
Check if the load is imbalanced or too heavy. Try redistributing the clothes and ensure the spin cycle is selected correctly.
Run an empty hot wash with baking soda and white vinegar, or use a specialized washing machine cleaner to eliminate odors.