Thomson TX999 User Manual
![Thomson TX999 Washing Machine manual cover](/images/YyXLPXEOUKDVgANvrGgIxsBt/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add detergent to the designated compartment, select the desired wash program using the control panel, and press the 'Start' button.
Ensure the machine is plugged in and the power supply is working. Check if the door is properly closed and the 'Start' button has been pressed. If the problem persists, refer to the troubleshooting section of the manual.
Turn off the machine and disconnect it from the power supply. Locate the filter access panel at the bottom front of the machine, open it, and turn the filter counterclockwise to remove it. Clean the filter under running water and reinstall it by turning it clockwise.
Loud noises during the spin cycle may be due to an unbalanced load. Try redistributing the laundry evenly in the drum. If the noise persists, check for foreign objects like coins or buttons trapped in the drum or filter.
Regularly clean the detergent drawer and filter, inspect hoses for leaks, and run an empty hot wash cycle with vinegar monthly to prevent mold and detergent buildup.
Check if the drain hose is kinked or blocked. Ensure the filter is clean and free of debris. If the issue continues, inspect the drain pump for any obstructions.
Error code 'E02' indicates a water supply issue. Ensure that the water tap is turned on and the inlet hose is not kinked or blocked. Check if the water pressure is adequate.
Use the Eco mode for energy-efficient washing, run full loads whenever possible, and wash with cold water to save on heating costs.
Yes, the Thomson TX999 has a 'Delicate' program specifically designed for washing delicate fabrics gently. Always check the care label on your garments before washing.
To reset the machine, turn it off and unplug it from the power source. Wait a few minutes, then plug it back in and turn it on. This can help clear minor electronic glitches.