Thomson TX9610 User Manual

To start a wash cycle, load your laundry into the drum, add detergent to the appropriate compartment, select your desired wash program using the control panel, and press the 'Start' button.
Ensure that the machine is plugged in, the door is properly closed, and the water supply is turned on. Check for any error codes on the display and refer to the user manual for troubleshooting steps.
Locate the filter access panel at the bottom front of the machine. Open it, unscrew the filter cap, remove any debris, and rinse the filter under running water before replacing it.
Regularly clean the detergent drawer, drum, and filter. Run a maintenance wash with a drum cleaner monthly, and ensure the machine is level to prevent excessive vibration.
Loud noises may be due to an unbalanced load, foreign objects in the drum, or an uneven surface. Ensure the machine is level and check the drum for any stray items.
Check the hoses for any cracks or loose connections, ensure the door seal is intact, and make sure the detergent drawer is not overfilled.
Inspect and clean the drain filter, check for kinks in the drain hose, and ensure the drain pump is functioning correctly.
To reset the machine, turn it off, unplug it from the power source, wait a few minutes, then plug it back in and restart the machine.
Refer to the user manual for the specific error code meaning and follow the recommended troubleshooting steps. If unresolved, contact customer support.
Leave the door slightly open after each wash to allow air circulation, regularly clean the door seal and detergent drawer, and use a washing machine cleaner monthly.