Thomson TX899 User Manual
![Thomson TX899 Washing Machine manual cover](/images/XdMwSdyXCvOKNFXPNBbXdVKm/thumbs/thumb175x175.webp)
To reset the Thomson TX899 washing machine, unplug the appliance from the power outlet, wait for about 1-2 minutes, and then plug it back in. This should reset the machine's settings.
Ensure that the door is properly closed and locked. Check if the power cord is connected and if there is a power supply. Also, verify if the water supply is turned on.
Run an empty cycle with hot water and add a cup of white vinegar or a washing machine cleaner to remove any residues and odors from the drum.
Ensure that the washing machine is level. Adjust the feet if necessary and make sure the load is balanced inside the drum.
Locate the filter at the bottom front of the washing machine. Open the cover, remove the filter, and clean it under running water before replacing it.
Regularly clean the drum, filter, and detergent drawer. Avoid overloading the machine and use the correct amount of detergent.
Check all hoses for any signs of leaks or cracks. Ensure that the detergent drawer is not clogged and that the door seal is intact and clean.
Inspect the drain hose for any clogs or kinks. Also, check the pump filter and clean it if necessary.
Pull the drawer out until it stops, then press the release lever to remove it completely. Rinse it under warm water to remove any detergent buildup.
Refer to the user manual to identify the error code. Follow the recommended troubleshooting steps or contact customer support for assistance.