Thomson GSIT1345B User Manual
![Thomson GSIT1345B Dishwasher manual cover](/images/eNqAqwbXLLoZglrIXLvFbNaR/thumbs/thumb175x175.webp)
To reset the Thomson GSIT1345B Dishwasher, press and hold the start button for 3 seconds until the display shows a reset message. Release the button and the dishwasher will reboot.
Check the filter and drain hose for any blockages. Clean out any debris and ensure the hose is not kinked. If the problem persists, inspect the pump for any obstructions.
It is recommended to clean the filter every month to ensure optimal performance and prevent clogs.
Ensure that you are not overloading the dishwasher and that all dishes are placed correctly. Check the spray arms for clogs and ensure that you are using the right detergent.
Inspect the spray arms for obstructions and ensure that the dishes are not interfering with them. Also, check for loose items in the dishwasher and tighten any loose screws.
Remove the spray arms by unscrewing them and rinse under warm water. Use a toothpick to clear any blockages in the nozzles. Reattach the spray arms securely.
No, you should only use dishwasher-specific detergent. Regular dish soap can cause excessive suds and may damage the appliance.
Regularly clean the filter, inspect and clean the spray arms, check the door seals for debris, and run an empty cycle with a dishwasher cleaner once a month.
Ensure the door is fully closed and latched. Check the power supply and make sure the circuit breaker has not tripped. Verify that the delay start function is not activated.
Check the door gasket for damage or debris and clean or replace it if necessary. Ensure the dishwasher is level and not overloaded. Also, inspect the hoses for any leaks or loose connections.