Team Losi Racing TLR338005 Parts Manual
![Team Losi Racing TLR338005 Race Kit manual cover](/images/zrSubpNxKWJSGhXBmRMFTdUm/thumbs/thumb175x175.webp)
To break in the motor of your TLR338005, start by running it at a low speed for a few minutes with no load. Gradually increase the speed over several cycles to ensure smooth operation and longevity.
It is recommended to check the vehicle after every race session. Pay particular attention to cleaning the chassis, inspecting the drivetrain for wear, and checking screws and fasteners for tightness.
Adjusting the suspension involves changing the shock oil viscosity, spring tension, and camber links. Softer setups are generally better for rough tracks, while stiffer setups are ideal for smooth, high-traction tracks.
First, check the battery charge and connections. Ensure the power switch is functioning. If the issue persists, check the receiver and ESC connections.
To enhance speed, consider upgrading to a higher performance motor and ESC, using lighter materials, and optimizing the gear ratios for your specific track conditions.
Refer to the user manual for disassembly instructions. Remove the damaged part, ensuring the area is clean, and replace it with a new component. Reassemble carefully, checking alignment and fit.
To set the gear mesh, adjust the motor position so that there is a small amount of play between the pinion and spur gear. Use a piece of paper between the gears to achieve a consistent gap.
Check the servo connections and ensure the receiver is properly bound to the transmitter. Inspect the servo horn for damage and replace if necessary.
Turn on the transmitter and hold down the setup button on the ESC while powering it on. Follow the LED indicators to set the neutral point, full throttle, and full brake positions.
For clay surfaces, use soft compound tires for better grip. On carpet, medium to hard compound tires are recommended. Adjust the tread pattern based on the level of traction required.