Team Losi Racing TLR232098 Parts Manual
![Team Losi Racing TLR232098 Race Kit manual cover](/images/WFnwUHAtmqqkQdEBHdymfYLf/thumbs/thumb175x175.webp)
It is recommended to clean the chassis and components after every race. Inspect and lubricate bearings, check for any loose screws, and ensure all moving parts are functioning properly. Perform a deep maintenance check every 5-10 runs.
Adjust the shock oil viscosity and spring tension based on track conditions. For bumpy tracks, use softer springs and lighter oil. For smooth tracks, opt for stiffer springs and heavier oil. Always test and adjust accordingly.
Check the steering servo connections and ensure the servo horn is securely attached. Inspect for any obstructions in the steering linkage and adjust the servo endpoints in your transmitter settings to ensure proper alignment.
Use high-quality batteries and always fully charge them before use. Avoid deep discharging the batteries and store them in a cool, dry place with a partial charge. Regularly check for any signs of wear or damage.
Use compressed air to remove loose dirt and debris, followed by a soft brush for more stubborn particles. Wipe down the chassis and components with a damp cloth, ensuring electronic parts are kept dry.
Ensure proper gear mesh and check for any binding in the drivetrain. Verify that the motor is not overloaded and consider using a motor heat sink or fan. Adjust gearing if necessary for your track conditions.
Check for any cracks or breaks in plastic parts, wear on the tires, and play in the suspension and steering components. Inspect for any stripped screws or worn-out bearings. Replace any damaged parts promptly.
Upgrade to high-performance tires and consider using a tuning kit to adjust toe, camber, and caster angles. Experiment with different shock oils and springs to suit your driving style and track conditions.
Check the throttle calibration on your transmitter and ensure there are no loose connections. Inspect the electronic speed controller (ESC) settings and ensure the gear mesh is not too tight or too loose.
Store the race kit in a cool, dry place away from direct sunlight. Disconnect the battery and ensure it is stored with a partial charge. Check that all components are clean and free from moisture, and cover the kit to protect it from dust.