Tascam CD-RW901SL Owner's Manual
![Tascam CD-RW901SL manual cover](/images/49817aa739fc6fe634920bb8/thumbs/thumb175x175.webp)
To finalize a disc, press the 'Finalize' button on the front panel. Confirm the action by pressing 'Enter' on the remote control. Ensure the disc is not in playback mode during this process.
If the CD tray does not open, check for any obstructions and ensure the unit is powered on. Try using the 'Open/Close' button on the remote. If the problem persists, perform a power cycle by turning the unit off and on again.
Use a commercial CD lens cleaner disc to clean the lens. Avoid using liquid cleaners directly, as they can damage the lens. Regular cleaning helps maintain optimal performance.
Yes, connect the external audio source to the input jacks on the rear panel. Select the appropriate input source using the 'Input Select' button. Press 'Record' to start recording.
The maximum recording time for a standard CD-R or CD-RW is typically 80 minutes. Ensure the disc capacity is not exceeded to avoid recording errors.
Ensure the disc was finalized. Unfinalized discs may not be compatible with other players. Also, check for scratches or defects on the disc surface.
Visit the Tascam website to check for firmware updates. Follow the instructions provided, which typically involve downloading the firmware file and updating via a CD or USB drive.
Check the audio connections to your amplifier or speakers. Ensure the correct output source is selected and the volume is adjusted properly. Verify that the mute function is not activated.
Use high-quality discs and ensure they are clean and free from scratches. Adjust the input levels to prevent distortion and use the built-in EQ settings to enhance audio quality.
Regularly clean the exterior and the CD tray. Use a lens cleaner to maintain the optical lens. Keep the unit in a dust-free environment and avoid extreme temperatures.