Suzuki RM-Z250 2018 Owner's Manual
![Suzuki RM-Z250 2018 Motorcycle manual cover](/images/HJatucGbXVLkOBRoGiYXVbcy/thumbs/thumb175x175.webp)
The recommended engine oil for the Suzuki RM-Z250 2018 is 10W-40, specifically designed for motorcycles with wet clutches.
It is recommended to inspect and clean the air filter after every ride in dusty conditions and replace it as needed or every 15-30 hours of operation.
The recommended tire pressure for the Suzuki RM-Z250 2018 is 15 psi for both the front and rear tires.
To adjust the suspension, refer to the owner's manual for the specific settings based on your weight and riding style. Typically, adjust the compression and rebound settings on the forks and shock to achieve the desired performance.
First, check the fuel level and ensure the fuel valve is open. Inspect the spark plug for fouling and replace if necessary. Confirm that the kill switch is in the 'run' position and the battery has a sufficient charge.
Improving throttle response can be achieved by ensuring the throttle cables are properly adjusted and lubricated, installing a high-performance air filter, and tuning the fuel injection system for optimal performance.
The recommended maintenance schedule includes oil changes every 10-15 hours, air filter cleaning every ride in dusty conditions, valve clearance checks every 30 hours, and regular inspections of brakes, chain, and tires.
To adjust the chain tension, loosen the rear axle nut, adjust the chain adjusters evenly on both sides, and ensure there is about 1.2 inches of slack at the midpoint of the chain. Tighten the axle nut after adjustment.
If the motorcycle overheats, stop and let it cool down. Check the coolant level and refill if necessary. Ensure the radiator fins are clean and unobstructed. Consider upgrading to a higher performance radiator if overheating persists.
To clean the exhaust system, allow it to cool completely, then use a mild detergent and water to clean the exterior. Avoid using abrasive materials that could damage the finish. Inspect for any signs of leaks or damage during maintenance.