Suzuki DR-Z400SM 2017 Owner's Manual
![Suzuki DR-Z400SM 2017 Motorcycle manual cover](/images/ZQOUkXzxPAgRsDYmkCaSsYmh/thumbs/thumb175x175.webp)
To perform an oil change, first warm up the engine slightly to make the oil flow out smoothly. Remove the drain plug and let the oil drain into a pan. Replace the drain plug and remove the oil filter. Install a new oil filter and refill the engine with the recommended oil type and capacity. Check the oil level with the dipstick and adjust as necessary.
The recommended oil for the 2017 Suzuki DR-Z400SM is 10W-40, specifically formulated for motorcycles, and should meet or exceed API SF/SG or JASO MA standards.
Start by checking the battery connections for corrosion or looseness. Use a multimeter to test the battery voltage, ensuring it is at least 12.6 volts. Inspect fuses and replace any that are blown. If the problem persists, examine the wiring harness for damage or disconnections.
The recommended tire pressure for the 2017 Suzuki DR-Z400SM is 22 psi for the front tire and 25 psi for the rear tire. Always check the tire pressure when the tires are cold for an accurate reading.
It is recommended to clean and lubricate the chain every 600 miles or after riding in wet or dusty conditions. Use a suitable chain cleaner and lubricant, and ensure to wipe off any excess lubricant to prevent dirt accumulation.
Symptoms of a failing clutch may include difficulty in shifting gears, a slipping clutch during acceleration, a spongy or stiff clutch lever, and unusual noises when engaging the clutch. If these symptoms occur, inspect and adjust the clutch cable or consider replacing worn clutch components.
To adjust the suspension, start with the preload settings on both the front forks and rear shock. Use the appropriate tools to increase or decrease preload based on your weight and riding style. Refer to the owner’s manual for specific adjustment instructions and settings.
To improve fuel efficiency, ensure regular maintenance such as keeping the air filter clean, maintaining correct tire pressure, and using the recommended oil. Additionally, practice smooth acceleration and deceleration, and avoid excessive idling.
Common causes of overheating include low coolant levels, a malfunctioning thermostat, a clogged radiator, and a faulty water pump. Regularly check and maintain the cooling system to prevent overheating issues.
To winterize your DR-Z400SM, first clean the motorcycle thoroughly. Add a fuel stabilizer to a full tank of gas and run the engine for a few minutes. Change the oil and filter, lubricate all moving parts, and remove the battery to store it in a cool, dry place. Cover the motorcycle and store it in a secure location.