Subaru Legacy 2.5i Limited 2019 Quick Guide
![Subaru Legacy 2.5i Limited 2019 Sedan manual cover](/images/YdGFCgEIiyvcjIbJtFoJmirG/thumbs/thumb175x175.webp)
The recommended engine oil for the Subaru Legacy 2.5i Limited 2019 Sedan is 0W-20 synthetic oil. This oil type helps enhance fuel efficiency and engine performance.
To reset the TPMS on the Subaru Legacy 2019, ensure all tires are inflated to the recommended pressure. Then, drive the car above 20 mph for at least 10 minutes. The system should reset automatically.
Regular maintenance for the Subaru Legacy 2.5i Limited 2019 includes oil changes every 6,000 miles, tire rotations every 6,000 miles, and brake inspections at least once a year. Refer to the owner’s manual for a detailed schedule.
To improve fuel efficiency, ensure regular maintenance, keep tires properly inflated, avoid excessive idling, and drive at steady speeds. Removing unnecessary weight from the vehicle can also help.
If the check engine light comes on, first ensure your gas cap is tight. If the light remains, schedule a diagnostic check with a certified Subaru technician to identify the issue.
To pair your smartphone, enable Bluetooth on your phone, go to the car’s multimedia system, select 'Phone,' then 'Add Device.' Choose your phone from the list and confirm the PIN to complete the pairing.
Common causes of battery drain include leaving lights on, faulty alternator, parasitic draw from electrical devices, or a battery nearing the end of its lifespan. Conduct regular checks to avoid these issues.
To change the cabin air filter, open the glove box, remove the limiting stop arm, and squeeze the sides of the glove box inward to access the filter compartment. Replace the old filter with a new one and reassemble.
A squealing noise upon starting could be due to a worn serpentine belt or tensioner. It’s advisable to have a mechanic inspect and replace any worn components.
To update the navigation system, visit the Subaru Map Update Portal, download the latest updates to a USB drive, and connect it to the vehicle's USB port. Follow the on-screen instructions to complete the update.