Subaru Forester Base 2021 Getting Started Guide
![Subaru Forester Base 2021 manual cover](/images/fPgJyrUPiTnnJNzTRiQNfgJi/thumbs/thumb175x175.webp)
To pair your phone, first enable Bluetooth on your device. Then, on the Subaru's infotainment screen, go to 'Settings' > 'Bluetooth' > 'Add Device'. Select your phone from the list and confirm the pairing request.
The Subaru Forester Base 2021 typically requires synthetic 0W-20 oil for optimal performance and efficiency. Always refer to the owner's manual for confirmation.
To reset the maintenance light, turn the ignition to 'ON' without starting the engine. Navigate to the 'Settings' menu on the LCD screen using the steering wheel controls, then select 'Maintenance Reset' and confirm.
The recommended tire pressure for the Subaru Forester Base 2021 is typically 33 psi for both front and rear tires. Check the placard on the driver's side door jamb for precise information.
To replace the cabin air filter, open the glove box and remove the damper arm. Press the sides of the glove box inward to release it and access the filter cover. Remove the old filter and insert a new one, making sure the airflow direction is correct.
If the battery dies, you can jump-start the vehicle using jumper cables and another car. Connect the positive cable to the positive terminals first, then the negative to the negative. Start the assisting vehicle, then the Forester. Allow it to run for a few minutes before disconnecting the cables in reverse order.
The Subaru Forester Base 2021 features a full-time AWD system that does not require manual engagement. It operates automatically, distributing power to all four wheels as needed for optimal traction.
If the infotainment system is unresponsive, try restarting the vehicle. Check for any system updates via the Subaru website. If the problem persists, disconnect the car battery for a few minutes to reset the system.
Brake fluid in the Subaru Forester Base 2021 should typically be changed every 30,000 miles or every 2 years, whichever comes first. Always follow the maintenance schedule provided in the owner's manual.
If the engine overheats, safely pull over and turn off the vehicle. Check the coolant level once the engine cools down. Inspect for leaks or blockages in the cooling system. Contact a professional mechanic if the issue persists.