Subaru Crosstrek Base 2023 Getting Started Guide
![Subaru Crosstrek Base 2023 manual cover](/images/lsJxqfMjzWkRFcFZCnBgVTBi/thumbs/thumb175x175.webp)
To connect your smartphone, go to the Bluetooth settings on your phone, enable Bluetooth, and select 'Subaru BT' from the list. Then, follow the prompts on both your phone and the car's infotainment screen to complete pairing.
First, ensure all tires are inflated to the recommended pressure. Then, drive the vehicle above 20 mph for a few minutes. The TPMS should automatically reset. If it doesn't, consult your owner's manual or visit a Subaru dealership.
The recommended oil type for the Subaru Crosstrek Base 2023 is 0W-20 synthetic oil, which ensures optimal engine performance and efficiency.
Open the hood and locate the headlight assembly. Remove the electrical connector from the back of the bulb, then twist the bulb counterclockwise to remove it. Insert the new bulb, twist it clockwise to secure, and reconnect the electrical connector.
The Subaru Crosstrek Base 2023 typically requires maintenance every 6,000 miles or 6 months, whichever comes first. This includes oil changes, tire rotations, and inspections. Always refer to your owner's manual for specific intervals.
To improve fuel efficiency, maintain proper tire pressure, use cruise control on highways, avoid rapid acceleration, and keep up with regular maintenance.
The check engine light can indicate various issues, from a loose gas cap to engine problems. Check the gas cap first; if the light remains on, have the vehicle diagnosed by a professional to determine the cause.
Ensure the vehicle is in drive and press the 'Eyesight' button on the steering wheel. The system will activate, and you can adjust settings via the infotainment screen. Always consult your owner's manual for detailed instructions.
If the battery dies, you can jump-start the vehicle using jumper cables and another car. Connect the positive and negative terminals accordingly, and start the assisting vehicle first, followed by the Crosstrek. Ensure both vehicles are turned off before disconnecting cables.
To update the navigation system, connect to Wi-Fi and access the update section in the infotainment settings. Follow the prompts to download and install updates. For detailed instructions, refer to the owner's manual or contact a Subaru dealership.