Subaru Crosstrek Base 2022 Getting Started Guide
![Subaru Crosstrek Base 2022 manual cover](/images/gEzgGCwodoLFuDcHCbskIMKf/thumbs/thumb175x175.webp)
To perform an oil change, warm up the engine, turn it off, and remove the drain plug to drain the oil. Replace the oil filter, reinstall the drain plug, and refill with the recommended oil type and amount.
The recommended tire pressure for the 2022 Subaru Crosstrek Base is typically 33 psi for both front and rear tires. Always check the owner's manual or the sticker on the driver's door jamb for confirmation.
To reset the maintenance reminder light, turn the ignition to the "ON" position without starting the engine. Use the controls on the steering wheel to navigate to the settings menu and locate the maintenance section to reset the reminder.
If the battery keeps dying, check for any lights or accessories left on, test the battery and alternator, and inspect battery connections for corrosion. Consider consulting a professional if the issue persists.
To connect your phone, enable Bluetooth on your phone, select "Bluetooth" on the car's multimedia system, and follow prompts to pair your device. Confirm the pairing code matches on both devices.
The 2022 Subaru Crosstrek Base is designed to run on regular unleaded gasoline with an octane rating of 87. Using higher octane fuel is not necessary and won't provide additional benefits.
To replace a headlight bulb, turn off the vehicle, open the hood, and locate the headlight assembly. Remove the electrical connector and the old bulb, replace it with a new bulb, and reconnect the connector.
The towing capacity of the 2022 Subaru Crosstrek Base is rated at 1,500 pounds. Ensure your trailer and load do not exceed this limit for safe towing.
To check the transmission fluid, warm up the engine, park on a level surface, and keep the engine idling. Pull out the transmission dipstick, wipe it clean, reinsert, and remove again to check the fluid level.
Common issues reported include occasional infotainment system glitches, windshield cracking, and issues with the EyeSight driver assist technology. Regular maintenance and software updates can mitigate some of these concerns.