Sony ZS-Y3 Operating Instructions
![Sony ZS-Y3 manual cover](/images/0d385b354080020a5aa4e38e/thumbs/thumb175x175.webp)
To set up the Sony ZS-Y3, plug it into a power source, extend the antenna for radio usage, and press the power button. Set the clock by pressing 'Clock' and adjusting the hour and minutes with the tuning buttons.
Ensure the device is plugged into a working power outlet. Check the power cord for damage. If using batteries, replace them with fresh ones and ensure they are correctly installed.
Extend the telescopic antenna fully and adjust its angle for the best reception. Avoid placing the unit near electronic devices that may cause interference.
Use a soft, dry cloth to clean the exterior of the device. Avoid using water or chemical cleaners. Regularly check and clean the CD compartment to prevent dust accumulation.
Press the 'CD' button, open the CD compartment, and place a CD with the label side up. Close the compartment and press the play button to start playback.
Yes, the Sony ZS-Y3 can be powered by 6 C-size batteries. Open the battery compartment on the back, insert the batteries according to the polarity markings, and close the compartment.
Check the CD for scratches or dirt and clean it if necessary. Ensure the CD is correctly placed in the compartment. Try another CD to determine if the issue is with the disc or the player.
Tune to the desired station, press and hold the desired preset number button until you hear a beep. The station is now stored and can be recalled by pressing the preset number button.
The Sony ZS-Y3 does not have Bluetooth capabilities. You can connect your phone using an auxiliary cable plugged into the AUX IN jack if available.
Check the volume settings and ensure they are not set too high, which can cause distortion. Verify the antenna is correctly positioned for radio playback and the CD is clean and undamaged for CD playback.