Sony ZS-X10 Operating Instructions

To set the clock, press and hold the CLOCK button until the time flashes. Use the TUNING +/– buttons to set the hour and minute, then press CLOCK again to confirm.
Check if the power cord is properly connected to both the unit and the power outlet. Also, ensure the outlet is working by testing it with another device. If using batteries, ensure they are inserted correctly and have sufficient charge.
Extend the FM antenna fully and adjust its position for better reception. For AM stations, try rotating the unit itself as the AM antenna is built-in. Avoid placing the unit near electronics that may cause interference.
Ensure the CD is clean and free of scratches. Try playing a different CD to see if the issue persists. If skipping continues, clean the lens with a lens cleaning disc.
Use the FUNCTION button on the unit to cycle through available audio sources such as CD, Radio, and AUX input.
Yes, you can connect your phone using an AUX cable. Plug one end into the phone's headphone jack and the other into the AUX input on the unit, then select AUX as the audio source.
Use a soft, dry cloth to wipe the exterior. For stubborn stains, slightly dampen the cloth with a mild detergent solution, but avoid getting moisture into the unit. Do not use strong solvents or abrasive materials.
Unplug the power cord and remove any batteries. Press and hold the POWER button for about 30 seconds to discharge the unit, then reconnect power. This will reset the unit to factory settings.
Ensure the CD is inserted label side up and is free of dirt or scratches. If the issue persists, try a different CD or clean the lens with a lens cleaning disc.
Use the MEGA BASS button to enhance bass output. Press the button until the MEGA BASS indicator lights up on the display.