Sony ZS-S4iP Operating Instructions
![Sony ZS-S4iP manual cover](/images/fd8b0aa19888baec709cd72c/thumbs/thumb175x175.webp)
To reset the Sony ZS-S4iP to factory settings, unplug the power cord, then plug it back in while holding down the STOP button. This will reset the device to its original settings.
Check if the power cord is properly connected and ensure that there is power at the outlet. If using batteries, make sure they are inserted correctly and have sufficient charge.
To improve radio reception, extend the antenna fully and adjust its position. For FM, try placing the unit near a window or away from other electronic devices that may cause interference.
Yes, you can connect an external audio device using the AUX IN jack on the back of the unit. Use a standard audio cable with a 3.5mm connector to link your device to the ZS-S4iP.
The Sony ZS-S4iP requires six 'C' size batteries for portable operation. Make sure to insert them according to the polarity markings inside the battery compartment.
To connect your iPod to the Sony ZS-S4iP, place it in the dock on top of the unit. Ensure the iPod model is compatible and that it is seated firmly in the dock connector.
Ensure the volume is turned up and that the correct function (CD, iPod, Tuner, or AUX) is selected. Check connections and restart the unit if necessary.
To clean the unit, use a soft, dry cloth to wipe the exterior. Avoid using any abrasive cleaners or solvents as they may damage the finish.
Yes, the Sony ZS-S4iP can play MP3 files from CD-R/RW discs. Ensure the disc is finalized after burning for compatibility.
To set the sleep timer, press the SLEEP button on the remote control repeatedly to select the desired duration (10, 20, 30, 60, 90, or 120 minutes). The unit will automatically turn off after the selected time.