Sony ZS-RS60BT Operating Instructions
![Sony ZS-RS60BT manual cover](/images/7918693ac66922212c69c20f/thumbs/thumb175x175.webp)
To pair your Bluetooth device, turn on the ZS-RS60BT and press the Bluetooth button until the Bluetooth indicator starts flashing. Enable Bluetooth on your device and select "ZS-RS60BT" from the list of available devices. Once paired, the indicator light will stay solid.
Ensure the disc is clean and free from scratches. Try a different disc to rule out a problem with the current one. If the issue persists, check for firmware updates or consult Sony support for further assistance.
To improve FM reception, fully extend the antenna and adjust its position. Moving the unit closer to a window or away from electronic devices may also help reduce interference.
Use a soft, dry cloth to clean the exterior. Avoid using any chemical solvents or abrasive materials. For the CD compartment, gently dust with a soft brush.
To reset the unit, unplug it from the power source for a few minutes. Reconnect it and hold down the "Stop" button until the display shows "RESET." This will clear all stored settings.
The auto standby feature may be enabled, which turns off the unit after 15 minutes of inactivity. You can disable this feature by accessing the settings menu and turning off auto standby.
Yes, the ZS-RS60BT supports MP3 playback from USB devices. Simply insert your USB drive into the port and select the USB function using the function button to start playback.
Check the volume level and reduce it if necessary. Ensure that the speakers are not blocked and that the audio source is not too loud. If using Bluetooth, ensure the device is within range.
Press and hold the "Clock/Timer Set" button until the hour blinks. Use the tune buttons to set the hour, then press "Clock/Timer Set" again to set the minutes. Press once more to confirm.
Yes, the ZS-RS60BT can operate on six C-size batteries. Open the battery compartment, insert the batteries ensuring correct polarity, and close the compartment.