Sony XM-404EQX Operating Instructions

Pages 12

Year 1999

Language(s)

of 12

Sony XM-404EQX Specification

The Sony XM-404EQX is a high-performance 4-channel car audio amplifier designed to deliver superior sound quality and versatile audio enhancements. This amplifier offers a maximum power output of 400 watts, providing ample power to drive a range of speaker configurations. It features a built-in equalizer with a frequency response ranging from 5 Hz to 50 kHz, ensuring detailed sound reproduction across all audio spectrums. The XM-404EQX incorporates a variable high-pass and low-pass filter, allowing users to fine-tune the audio output to match their specific preferences and speaker capabilities. Its signal-to-noise ratio exceeds 90 dB, minimizing background noise and ensuring crisp audio clarity. The Total Harmonic Distortion (THD) is kept below 0.05%, which contributes to the amplifier’s ability to produce clean and accurate sound. The amplifier is designed with a sleek, compact chassis that facilitates easy installation in various vehicle interiors. It also includes thermal protection, overload protection, and short circuit protection to safeguard against potential damage and ensure reliability. With RCA inputs and speaker-level inputs, the XM-404EQX is compatible with a wide range of audio sources, providing flexibility in integration with existing car audio systems. Additionally, its efficient heat dissipation system ensures optimal performance even during extended use. The Sony XM-404EQX is an ideal choice for car audio enthusiasts seeking a robust and adaptable solution to enhance their in-vehicle audio experience.

Sony XM-404EQX F.A.Q.

How do I properly install the Sony XM-404EQX amplifier in my vehicle?

To install the Sony XM-404EQX, ensure the power supply is disconnected, mount the amplifier securely in a location with adequate ventilation, and connect the power, ground, remote, and speaker wires according to the user manual.

What should I do if the Sony XM-404EQX is not powering on?

Check the power connections to ensure they are secure, verify that the fuse is not blown, and ensure the remote turn-on lead is properly connected to the head unit.

How can I adjust the equalizer settings for optimal sound on the Sony XM-404EQX?

Use the built-in equalizer controls to adjust the bass, midrange, and treble levels. Refer to the manual for recommended settings based on music preference.

What troubleshooting steps should I take if there's no sound coming from my speakers?

Ensure all speaker wires are connected correctly, check the amplifier's gain settings, make sure the source unit is functioning, and verify that the amplifier is not in protection mode.

How do I prevent the Sony XM-404EQX from overheating during use?

Ensure the amplifier is installed in a well-ventilated area, avoid blocking the heat sinks, and consider using a cooling fan if necessary.

What maintenance is required for the Sony XM-404EQX amplifier?

Regularly check all connections for tightness, clean the amplifier's exterior with a soft, dry cloth, and periodically inspect the wires and fuses for signs of wear or damage.

How can I eliminate noise interference in my audio system when using the Sony XM-404EQX?

Use high-quality RCA cables, ensure proper grounding, and route power and audio cables separately to minimize interference.

What are the signs that the Sony XM-404EQX is in protection mode, and how do I resolve it?

Indicators such as no sound or a lit protection light suggest protection mode. Resolve it by checking for short circuits, ensuring proper ventilation, and resetting the amplifier if necessary.

How do I bridge two channels on the Sony XM-404EQX for increased power output?

Refer to the amplifier's manual for specific bridging instructions. Typically, you connect the positive terminal of one channel to the positive speaker terminal and the negative terminal of the adjacent channel to the negative speaker terminal.

What should I consider when setting the gain control on the Sony XM-404EQX?

Set the gain control to match the output level of your head unit. Start with the gain low, then gradually increase it until you achieve a balanced sound without distortion.