Sony XM-2351 Operating Instructions

Pages 14

Year 1996

Language(s)

of 14

Sony XM-2351 Specification

The Sony XM-2351 is a high-performance car audio amplifier designed to enhance the listening experience with its robust power output and advanced circuitry. This amplifier delivers 350 watts RMS at 4 ohms and can achieve a maximum power output of 700 watts, ensuring powerful sound reproduction with minimal distortion. It features a Class AB amplifier design, which balances efficiency and audio fidelity, providing clear and dynamic sound quality across a wide range of frequencies.

The XM-2351 includes a variable low-pass filter, allowing users to tailor the frequency response to their specific speaker setup, optimizing bass performance. It also incorporates Sony's proprietary Thermal Control Circuitry, which prevents overheating by managing the amplifier’s temperature, enhancing durability and reliability. The device supports both high-level and low-level inputs, offering compatibility with a variety of head units and making it a versatile choice for different car audio systems.

Additionally, the amplifier is equipped with a sleek, sturdy aluminum heat sink that efficiently dissipates heat, maintaining optimal operating conditions. It is housed in a compact chassis, making installation convenient even in vehicles with limited space. The XM-2351's design emphasizes both functionality and aesthetics, with a stylish finish that complements modern car interiors. This amplifier is an excellent choice for audio enthusiasts seeking to upgrade their vehicle's sound system with a reliable and powerful component that delivers exceptional audio performance.

Sony XM-2351 F.A.Q.

How can I connect my Sony XM-2351 amplifier to my car stereo system?

First, ensure the amplifier is powered off. Connect the RCA cables from the stereo’s output to the amplifier’s input. Then, connect the speaker wires from the amplifier to the speakers. Finally, connect the power, ground, and remote turn-on wires.

What is the recommended maintenance routine for the Sony XM-2351 amplifier?

Regularly clean the amplifier’s exterior with a dry cloth to remove dust. Check the connections for any loose wires monthly, and ensure the ventilation areas are unobstructed.

Why is my Sony XM-2351 amplifier overheating?

Overheating can be caused by blocked ventilation or being overdriven. Ensure the amplifier has adequate airflow and is not covered. Also, verify that the gain settings are not too high.

How can I troubleshoot sound distortion from my Sony XM-2351 amplifier?

Check the speaker connections for any loose wires and ensure all RCA cables are firmly connected. Verify that the gain and equalizer settings are properly adjusted.

What should I do if the Sony XM-2351 amplifier does not power on?

Ensure the power and ground wires are properly connected. Check the fuse on the amplifier and replace it if blown. Also, verify the remote turn-on wire is connected correctly.

Can I bridge the channels on the Sony XM-2351 amplifier?

Yes, the Sony XM-2351 supports bridging. Refer to the user manual for specific instructions on how to configure the connections for bridging channels.

What is the correct way to set the gain on the Sony XM-2351 amplifier?

Start with the gain at its minimum setting. Play music and gradually increase the gain until you achieve the desired volume without distortion. Avoid setting the gain too high to prevent damage.

How do I reset the Sony XM-2351 amplifier if it stops working?

Power off the amplifier and disconnect it from the power source. Wait for about 30 seconds, then reconnect and power it on. This can reset the amplifier’s internal circuitry.

What type of speakers are compatible with the Sony XM-2351 amplifier?

The Sony XM-2351 amplifier is compatible with speakers that match its output power and impedance specifications, typically 4 to 8 ohms. Consult the manual for specific recommendations.

How can I improve the sound quality of my system with the Sony XM-2351 amplifier?

Ensure all connections are secure and use high-quality RCA cables. Properly tune the amplifier’s gain and equalizer settings to match your speakers and listening preferences.