Sony ST-JX285 Service Manual
![Sony ST-JX285 manual cover](/images/dbaecd130ba962ca228c34ca/thumbs/thumb175x175.webp)
To set up your Sony ST-JX285, connect the FM and AM antennas to their respective ports. Plug the tuner into a power outlet, then connect the audio output to your amplifier or receiver. Use the function buttons to select the desired frequency band and tune into your preferred station.
Ensure the power cable is securely plugged into both the tuner and the outlet. Check if the outlet is functional by testing it with another device. If the unit still doesn’t power on, inspect the power cable for damage and replace it if necessary.
For better FM reception, adjust the position of the FM antenna and ensure it is fully extended. Consider using an outdoor or roof-mounted antenna for stronger signals. Additionally, try repositioning the tuner away from electronic devices that may cause interference.
To reset the presets, press the 'Memory' button on the tuner and select the preset number you wish to clear. Tune to the desired station and press the 'Memory' button again to save the new station to that preset number.
Turn off and unplug the tuner before cleaning. Use a soft, dry cloth to wipe the exterior. Avoid using any liquid or aerosol cleaners. For more thorough cleaning, gently use a damp cloth with a mild soap solution only on exterior surfaces, ensuring it does not enter any openings.
Check the power connection to ensure it is secure. If the flickering persists, try plugging the tuner into a different outlet. If these steps do not resolve the issue, the internal display components may need inspection by a professional technician.
Tune to the desired radio station using the tuning dial or buttons. Press the 'Memory' button, then select a preset number using the preset buttons. Press 'Memory' again to store the station to the chosen preset.
Ensure that the audio cables are properly connected from the tuner to the amplifier or receiver. Check that the amplifier or receiver is turned on and set to the correct input source. Also, verify the volume is turned up on both the tuner and the amplifier/receiver.
Reposition the AM loop antenna for optimal reception, ideally away from other electronic devices that can cause interference. If possible, use an external AM antenna to further improve signal quality.
Check if the tuning knob is physically stuck or obstructed. Gently clean around the knob with a dry cloth. If the issue persists, the potentiometer inside might be faulty and require professional service to repair or replace.