Sony SRF-PSY04 Operating Instructions
![Sony SRF-PSY04 manual cover](/images/175c54fe152848204d8192c4/thumbs/thumb175x175.webp)
To change the batteries in your Sony SRF-PSY04, slide open the battery compartment cover located on the back of the device, remove the old batteries, and insert new AA batteries, ensuring correct polarity. Close the compartment securely.
If you experience poor radio reception, extend the antenna fully and adjust its position. Try moving to a different location for better signal strength and avoid interference from electronic devices.
To reset the Sony SRF-PSY04, remove the batteries and wait for a few minutes before reinserting them. This can help resolve issues by resetting the device settings.
To set a preset station, tune to your desired frequency, press and hold the preset button until the display flashes, then release the button. The station is now saved as a preset.
Use a soft, dry cloth to gently wipe the exterior. Avoid using abrasive cleaners or exposing the device to water. For stubborn dirt, lightly dampen the cloth with water and gently clean the surface.
The auto-off feature might be enabled, which turns off the radio after a set period. Check the timer settings and disable the auto-off function if necessary. Also, ensure the batteries are not depleted.
Ensure the antenna is fully extended and positioned correctly. Check for any obstructions or interference. Adjust the volume and tone settings to enhance audio quality.
Check the battery level and replace them if necessary. If the issue persists, the device might need professional servicing to address potential internal faults.
To switch between AM and FM bands, use the band selector switch on the device. Slide it to the desired band and adjust the tuning dial to find your station.
Yes, you can use rechargeable AA batteries in the Sony SRF-PSY04. Ensure they are fully charged for optimal performance, and follow the same installation procedure as with regular batteries.