Sony SRF-M90 Operating Instructions
![Sony SRF-M90 manual cover](/images/d29d22de17faa36a1935cbd4/thumbs/thumb175x175.webp)
To set the clock on the Sony SRF-M90, press and hold the "CLOCK" button until the time starts flashing. Use the "TUNE" controls to adjust the hours and minutes, and press "CLOCK" again to save the settings.
First, check if the batteries are properly installed and have enough charge. If using the AC adapter, ensure it's properly connected. Try resetting the device by removing the batteries and unplugging the adapter for a few minutes.
Extend the antenna fully and adjust its position for better reception. Avoid obstructions and interference from electronic devices. For AM reception, try rotating the device to find the best signal.
Ensure the headphones are securely plugged into the headphone jack. Check the volume level and make sure the "MUTE" function is not activated. Test with another pair of headphones if possible.
Tune to the desired station, then press and hold a preset button until you hear a beep. The station is now stored in that preset number. Repeat the process for other stations.
Use a soft, dry cloth to gently wipe the exterior. Avoid using solvents or abrasive cleaners. For stubborn dirt, slightly dampen the cloth with water and wipe gently.
Open the battery compartment cover, remove the old batteries, and insert new ones, ensuring the correct polarity. Replace the cover securely.
Check the battery level as a low charge can affect display brightness. If using an AC adapter, ensure it is functioning correctly. Adjust the display brightness settings if available.
Yes, you can use rechargeable batteries. Ensure they are fully charged and replace them when the device indicates low battery. Follow the manufacturer's instructions for charging.
Remove the batteries and disconnect the AC adapter. Press and hold the "RESET" button using a pointed object for a few seconds. Reinsert the batteries or reconnect the adapter to restart the device.