Sony SRF-M35 Operating Instructions
![Sony SRF-M35 manual cover](/images/c7d0b1a91f4700cdc7bb9430/thumbs/thumb175x175.webp)
To improve FM reception, try extending the headphones cord fully, as it acts as the antenna. Also, ensure you are in an area with fewer obstructions and interference.
Check if the batteries are installed correctly and have sufficient charge. If the issue persists, try replacing them with new batteries.
Press the 'Clock' button and hold it until the time starts flashing, then use the tuning buttons to set the correct time. Press 'Clock' again to save the setting.
Ensure that the volume is turned up and that headphones are fully plugged into the unit. Check for any obstructions or damage to the headphone jack.
Use the tuning buttons to navigate through the available stations. Press and hold the button to scan for the next available station automatically.
The Sony SRF-M35 requires two AAA batteries for operation.
Use a soft, dry cloth to gently wipe the exterior. Avoid using any chemicals or liquids to prevent damage to the unit.
No, the Sony SRF-M35 does not have a preset station feature. You will need to manually tune to each station.
Unfortunately, the Sony SRF-M35 does not retain clock settings when batteries are removed. You will need to reset the time after replacing the batteries.
Ensure the tuning dial is not obstructed or damaged. If the issue persists, try performing a manual reset by removing the batteries for a few minutes and then reinserting them.