Sony SRF-M33 Operating Instructions
![Sony SRF-M33 manual cover](/images/3900f2ed40e4941ae1aaee2d/thumbs/thumb175x175.webp)
To change the batteries, open the battery compartment on the back of the unit by sliding the cover. Insert two AAA batteries, aligning them according to the polarity markings, and then close the cover securely.
If the reception is poor, try extending the antenna fully and repositioning the radio. Additionally, avoid obstructions and interference from electronic devices.
To preset stations, tune into the desired station, then press and hold the preset button until the display blinks. Use the tuning buttons to select a preset number and press the preset button again to confirm.
First, check the batteries to ensure they are inserted correctly and have sufficient charge. If the problem persists, try replacing the batteries.
Use a soft, dry cloth to gently wipe the exterior of the radio. Avoid using any liquid cleaners or exposing the unit to moisture.
Yes, the Sony SRF-M33 has a headphone jack that allows you to connect standard 3.5mm headphones for private listening.
Ensure the volume is turned up and not muted. Also, check the headphone jack to make sure no headphones or cables are connected, as this will disable the speakers.
There is no dedicated reset button on the Sony SRF-M33. To reset, remove the batteries and reinsert them after a few minutes.
To improve battery life, use alkaline batteries and turn off the radio when not in use. Also, consider lowering the volume level.
To switch between AM and FM, press the Band button on the radio until the desired band is displayed on the screen.