Sony SRF-H5 Operating Instructions
![Sony SRF-H5 manual cover](/images/94bf6d900e74922a91dc6a5e/thumbs/thumb175x175.webp)
To change the batteries in the Sony SRF-H5, slide the battery compartment cover open, remove the old batteries, and insert new ones, ensuring the correct polarity. Then, close the compartment securely.
If the SRF-H5 is not turning on, check that the batteries are properly inserted and have sufficient charge. If the issue persists, try replacing the batteries with new ones.
To improve FM reception, extend the headphones, which act as an antenna. Try moving to an area with better signal strength or adjust the position of the headphones.
To reset the SRF-H5, remove the batteries, wait for a minute, and then reinsert them. This will reset the device to its default factory settings.
Clean the SRF-H5 by wiping it with a soft, dry cloth. Avoid using any chemicals or abrasive materials to prevent damage to the surface.
Distorted sound may be due to low battery power. Replace the batteries with new ones. Also, check if the headphones are fully plugged in.
To set the clock, press and hold the "Time Set" button until the hour starts flashing. Use the tuning buttons to set the correct hour, then press "Time Set" again to adjust the minutes.
Yes, you can use rechargeable batteries in the SRF-H5. Ensure they are fully charged before use for optimal performance.
When not in use, store the SRF-H5 in a cool, dry place. Remove the batteries to prevent leakage and protect it from extreme temperatures.
To save a radio station preset, tune to the desired station, press and hold the "Memory" button until the preset number flashes, then use the tuning buttons to select a preset number and press "Memory" again to save.