Sony SAL70400G2 Operating Instructions
![Sony SAL70400G2 manual cover](/images/d90590f91685a31ad4376fd5/thumbs/thumb175x175.webp)
To attach the Sony SAL70400G2 lens, align the white dot on the lens with the white dot on the camera mount. Insert the lens into the mount and turn it clockwise until it clicks securely into place.
If the lens is not focusing properly, ensure that the AF/MF switch on the lens is set to AF. Clean the lens and camera contacts with a dry microfiber cloth. Check the camera settings and reset them if necessary.
To clean the lens, use a soft, lint-free cloth or a lens brush to remove dust. For smudges or fingerprints, apply a small amount of lens cleaner to a microfiber cloth and gently wipe the lens surface. Avoid using excessive pressure.
Store the lens in a cool, dry place with the lens cap on. Use a padded camera bag or case to protect it from physical damage. Avoid exposing the lens to extreme temperatures or humidity.
The Sony SAL70400G2 lens does not have updatable firmware. Ensure your camera body firmware is up to date to maintain optimal performance with the lens.
The minimum focusing distance of the Sony SAL70400G2 lens is approximately 1.5 meters (4.92 feet). This allows for close-up shots while maintaining sharp focus.
Yes, the Sony SAL70400G2 lens is compatible with Sony teleconverters, such as the 1.4x and 2.0x models, although autofocus performance may vary.
To reduce lens flare and ghosting, use the supplied lens hood. Avoid shooting directly into strong light sources and adjust the angle of the lens relative to the light source.
If the zoom ring is stiff, check for dirt or debris around the zoom ring and clean it gently. If the issue persists, consider having it serviced by a professional technician to prevent damage.
For optimal image stabilization, ensure the SteadyShot feature is enabled on your camera. Use a tripod or monopod for additional stability, especially in low-light conditions or at maximum zoom.