Sony MHC-DX60AV Operating Instructions
![Sony MHC-DX60AV manual cover](/images/2db5706cb1bb0d0116f4c62b/thumbs/thumb175x175.webp)
To reset the Sony MHC-DX60AV to factory settings, turn off the system, then press and hold the STOP and ENTER buttons simultaneously until 'RESET' appears on the display.
If the CD tray won't open, first ensure that the system is powered on. Then, press the OPEN/CLOSE button on the unit. If it still doesn't open, try unplugging the system for a few minutes and then plugging it back in.
Yes, you can connect your smartphone to the Sony MHC-DX60AV using an audio cable with a 3.5mm jack into the AUDIO IN port on the system.
To clean the CD lens, use a CD lens cleaning disc as per the instructions provided with the cleaner. Avoid using liquid cleaners or opening the unit yourself.
If there's no sound, check that the speaker wires are properly connected and not damaged. Also, verify that the volume is turned up and the correct source is selected.
To improve FM reception, extend the FM antenna fully and position it for the best signal. Avoid placing it near electronics that may cause interference.
If the system won't power on, check that it is plugged into a working outlet. If it still doesn't turn on, try using a different power cable if available.
To set the clock, press the TIMER SET button, then use the tuning buttons to set the hour and minute. Confirm by pressing ENTER.
The Sony MHC-DX60AV primarily supports audio CDs and may not support MP3 file playback directly. Use an auxiliary input for external MP3 players.
Ensure the CD is clean and not scratched. Try a different CD to see if the issue persists. If skipping continues, consider cleaning the lens with a lens cleaner.