Sony MDR-ZX660AP Operating Instructions
![Sony MDR-ZX660AP manual cover](/images/97beb60489362bf0f9384d90/thumbs/thumb175x175.webp)
To clean your Sony MDR-ZX660AP headphones, use a soft, dry cloth to wipe the exterior. Avoid using water or cleaning solvents as they may damage the headphones. For the ear pads, consider using a slightly damp cloth and allow them to air dry completely before use. Regular cleaning will help maintain the appearance and hygiene of the headphones.
First, check the audio source to ensure it is set to stereo output and the balance is centered. Next, inspect the headphone cable and connector for damage. Try using the headphones with a different device to determine if the issue persists. If the problem continues, it may require professional repair.
Yes, the Sony MDR-ZX660AP features an inline microphone and remote control, allowing you to make and receive phone calls. Simply connect the headphones to your smartphone and use the inline button to answer or end calls.
To replace the ear pads, gently pull the old pads away from the ear cups. Align the new pads with the ear cups and press them into place until they are securely attached. Make sure they are properly aligned for optimal comfort and sound quality.
Ensure that the headphone plug is fully inserted into the audio jack of your device. Check the device settings to confirm that it is set to output sound through the headphones. If the problem persists, try using the headphones with another device to rule out any device-specific issues.
The Sony MDR-ZX660AP headphones are compatible with most smartphones that have a 3.5mm audio jack. Ensure that your smartphone supports wired audio connections through the headphone jack for compatibility.
To enhance sound quality, ensure a good fit by adjusting the headband for comfort and proper seal. Use high-quality audio files and a reliable audio source. Additionally, consider using an equalizer to adjust the sound profile to your liking.
Store your headphones in a cool, dry place to prevent damage. Consider using a protective case to avoid dust accumulation and physical damage. Avoid wrapping the cable tightly around the headphones to prevent cable wear.
Yes, the Sony MDR-ZX660AP headphones can be used with computers that have a 3.5mm audio port. Simply plug the headphones into the audio jack on your computer. Ensure that the computer audio settings are configured to use the headphones as the output device.
Check the connection to ensure the plug is fully inserted into the device's audio jack. Verify that the device is compatible with inline remote functions. Test the headphones with another device to determine if the issue is with the headphones or the original device.