Sony MDR-RF985RK Operating Instructions

To connect the Sony MDR-RF985RK headphones to your TV, plug the transmitter into the audio output of your TV using the supplied audio cable. Ensure the transmitter is powered on and set to the same channel as the headphones.
If you experience static noise, try changing the channel on the transmitter and headphones. Ensure there are no obstructions between the transmitter and headphones, and check that both devices are fully charged.
To improve battery life, make sure to fully charge the headphones before use and turn them off when not in use. Avoid storing them in high-temperature environments.
If your headphones are not charging, check the connection between the headphones and the charging base. Ensure the charging base is plugged into a working power outlet. If the problem persists, the battery may need to be replaced.
Yes, the Sony MDR-RF985RK headphones can be connected to any device with an audio output using the supplied audio cable.
The volume can be adjusted using the volume control located on the right earcup of the headphones.
The Sony MDR-RF985RK headphones have a wireless range of up to 150 feet (approximately 45 meters) in open space.
To reset the headphones, turn them off and then on again. If issues persist, refer to the manual for detailed reset instructions specific to your model.
If the sound cuts out, try repositioning the transmitter or moving closer to it. Ensure there are no other wireless devices causing interference.
To clean the headphones, use a soft, dry cloth. Avoid using solvents or alcohol. Store the headphones in a cool, dry place when not in use.