Sony MDR-RF915RK Operating Instructions

To connect the Sony MDR-RF915RK to your TV, plug the transmitter into the audio output port of your TV using the supplied audio cable. Ensure the transmitter is powered on, and the headphones are charged and within range.
If your headphones are not charging, ensure that the AC power adapter is properly connected to the transmitter and plugged into a working outlet. Check the charging contacts on both the headphones and the transmitter for any debris or dirt that might be interfering with the connection.
To improve sound quality, ensure that the headphones are within the optimal range of the transmitter. Avoid any physical obstructions between the transmitter and headphones. Adjust the frequency channel on the transmitter to reduce interference.
Static noise can often be resolved by adjusting the frequency channel on the transmitter. Also, ensure that there are no electronic devices causing interference nearby, and check that the audio cable connections are secure.
The Sony MDR-RF915RK headphones offer up to 18 hours of battery life on a full charge. Battery life may vary depending on the usage and volume levels.
You can adjust the volume using the volume control located on the headphones. Turn the dial to increase or decrease the volume to your preferred level.
Yes, replacement parts such as ear pads and batteries can typically be purchased from Sony or authorized retailers. Check the Sony support website for more details.
The Sony MDR-RF915RK wireless headphones have a range of up to 150 feet (approximately 45 meters) in open spaces. The effective range may vary depending on obstructions and interference.
The charge indicator light on the transmitter will turn off when the headphones are fully charged. It usually takes about 16 hours to fully charge the headphones.
Yes, you can use the Sony MDR-RF915RK headphones with your computer by connecting the transmitter to the computer's audio output port using the supplied audio cable. Ensure your computer's audio settings are configured to output sound through the connected port.