Sony MDR-NC8 Operating Instructions
![Sony MDR-NC8 manual cover](/images/1e36ee0d1cc9e2c08991604c/thumbs/thumb175x175.webp)
To activate the noise-cancelling feature, slide the power switch located on the right earcup to the "ON" position. You should hear a slight hiss, indicating that the noise-cancelling is active.
Ensure that the headphones are powered on, and the battery is properly inserted and charged. Replace the battery if necessary. Check the power switch and make sure it is set to "ON".
To replace the battery, open the battery compartment on the right earcup by sliding the cover down. Remove the old AAA battery and insert a new one, ensuring the correct polarity. Close the compartment securely.
Yes, the headphones can function without the noise-cancelling feature. Simply turn the power switch to "OFF" to use them as standard headphones.
Use a soft, dry cloth to gently wipe the exterior surfaces. Avoid using water or cleaning solutions. For the ear pads, a slightly damp cloth can be used if necessary, but ensure they are completely dry before use.
Check the connection to your audio device to ensure it is secure. If using the noise-cancelling feature, ensure the battery is charged and the power is on. Test the headphones with a different device to rule out device-related issues.
Yes, the ear pads on the Sony MDR-NC8 are replaceable. You can purchase replacement ear pads and follow the instructions provided to replace them.
When not in use, turn off the noise-cancelling feature to conserve battery life. Store the headphones in a cool, dry place, preferably in a protective case to avoid damage.
The expected battery life for the noise-cancelling feature is approximately 80 hours with a single AAA battery, though this may vary depending on usage and battery type.
Yes, rechargeable AAA batteries can be used with the Sony MDR-NC8. However, the battery life may differ from that of standard alkaline batteries.