Sony KDL-55W650D Operating Instructions
![Sony KDL-55W650D manual cover](/images/0cf17c513dcf6f182fa2b658/thumbs/thumb175x175.webp)
To connect to Wi-Fi, press the 'Home' button on your remote, navigate to 'Settings', select 'Network', and then 'Network Setup'. Choose 'Wireless Setup' and follow the on-screen instructions to connect to your Wi-Fi network.
Ensure that the TV is plugged in securely and that the power outlet is working. Try pressing the power button on the TV itself, not just the remote. If it still won't turn on, unplug the TV for a few minutes, then plug it back in and try again.
To update the software, press the 'Home' button on the remote, go to 'Settings', select 'Customer Support', then 'Software Update'. Follow the on-screen instructions to download and install any available updates.
Check if the TV is muted or if the volume is turned down. Ensure that audio cables are connected properly if using external devices. Also, check the audio output settings to ensure they are set correctly.
To perform a factory reset, press the 'Home' button, go to 'Settings', select 'System Settings', then 'Customer Support', and choose 'Factory Settings'. Follow the prompts to reset the TV to its original settings.
Yes, you can use the TV as a computer monitor. Connect your computer to the TV using an HDMI cable. Select the appropriate HDMI input on the TV to display your computer screen.
Go to 'Settings', select 'Picture & Display', and then 'Picture Adjustments'. You can tweak settings such as brightness, contrast, and sharpness to enhance picture quality according to your preference.
Turn off and unplug the TV. Use a soft, dry microfiber cloth to gently wipe the screen. Avoid using any cleaning solutions or spraying liquids directly onto the screen.
Ensure that the source device is set to output 1080p resolution and that you are using a high-speed HDMI cable. Check the TV's input settings to make sure it is set to the correct HDMI port.
Press the 'Home' button on your remote, go to 'Settings', select 'Digital Setup', and then 'Subtitle Setup'. Choose 'Subtitle Display' and set it to 'On'. Subtitles will now be displayed if available.