Sony ICF-SW20 v2 Operating Instructions

Pages 2

Year 1989

Language(s)

of 2

Sony ICF-SW20 Specification

The Sony ICF-SW20 is a compact, portable shortwave radio designed for easy global radio reception. It operates across a frequency range covering AM, FM, and shortwave bands, making it versatile for international broadcasting. The radio features a straightforward analog tuning system, allowing users to manually adjust frequencies for precise signal capture. Its compact dimensions and lightweight design enhance portability, making it ideal for travel.

The ICF-SW20 is equipped with a telescopic antenna to improve FM and shortwave reception, while an internal ferrite bar antenna optimizes AM signal clarity. It includes a mono speaker that delivers clear audio output, suitable for personal listening. The radio also offers a headphone jack for private audio experiences, ensuring versatility in different environments.

Powering the Sony ICF-SW20 requires two AA batteries, providing convenient and accessible energy options for users on the go. The device's power-efficient design ensures extended battery life, making it reliable for prolonged usage during trips or in areas with limited power access.

The radio's durable plastic casing offers resilience against everyday wear and tear, while its intuitive control layout provides ease of use. Its minimalistic design features essential controls, including tuning and volume adjustment knobs, ensuring straightforward operation. The Sony ICF-SW20's combination of portability, ease of use, and broad frequency coverage makes it a practical choice for travelers and radio enthusiasts seeking reliable access to global broadcasts.

Sony ICF-SW20 F.A.Q.

How do I set the time on my Sony ICF-SW20?

To set the time on your Sony ICF-SW20, first switch the device to 'Clock' mode. Press and hold the 'Time Set' button while using the tuning knob to adjust the hour and minute. Release the 'Time Set' button once the correct time is displayed.

What should I do if the radio does not turn on?

If your Sony ICF-SW20 does not turn on, first check the battery compartment to ensure that the batteries are properly installed and have sufficient charge. Replace the batteries if necessary. If the problem persists, inspect the battery contacts for corrosion and clean them if needed.

How can I improve the reception on my Sony ICF-SW20?

To improve reception, fully extend the telescopic antenna and adjust its angle. Position the radio near a window and away from electronic devices that may cause interference. For shortwave reception, try tuning at night when signals are typically stronger.

How do I switch between AM and FM bands?

To switch between AM and FM bands on the Sony ICF-SW20, use the 'Band' selector switch located on the side of the radio. Slide the switch to the desired band. The indicator on the display will show the selected band.

Why is there no sound even if the radio is on?

If the radio is on but there is no sound, check the volume control to ensure it is turned up. Also, inspect the headphone jack to ensure nothing is inserted that might mute the speaker. If using headphones, confirm they are properly connected.

Can I use rechargeable batteries with the Sony ICF-SW20?

Yes, you can use rechargeable batteries with the Sony ICF-SW20. Ensure they are of the correct size (AA) and voltage. Note that rechargeable batteries may not last as long as alkaline batteries, so monitor their charge levels accordingly.

What are the steps to perform a reset on the Sony ICF-SW20?

To reset the Sony ICF-SW20, remove the batteries and leave the device without power for a few minutes. Reinsert the batteries and turn the device back on. This will reset the settings, so you may need to reconfigure the time and preset stations.

How do I store a station in memory on the Sony ICF-SW20?

To store a station, tune to your desired station, then press and hold the 'Memory' button until you hear a beep. Use the number buttons to select a memory preset location, then press 'Enter' to store the station in that memory slot.

Why does the display show incorrect characters or is not visible?

If the display shows incorrect characters, try resetting the device by removing and reinserting the batteries. If the display is not visible, check the contrast settings and adjust if necessary. Ensure the batteries have sufficient charge.

How can I clean the exterior of my Sony ICF-SW20?

To clean the exterior, use a soft, dry cloth to wipe the surface. Avoid using any liquids or solvents that may damage the radio. For stubborn dirt, slightly dampen the cloth with water and gently clean the area, ensuring no moisture enters the device.