Sony ICF-CS750 Operating Instructions
![Sony ICF-CS750 manual cover](/images/85a581c0c54a286c9640f52a/thumbs/thumb175x175.webp)
To set the alarm on your Sony ICF-CS750, press the ALARM SET button. Use the TUNE/TIME SET+ or – button to adjust the desired time. Make sure to set the AM/PM correctly. Confirm by pressing the ALARM SET button again.
First, ensure that the device is plugged into a working outlet. Check if the power cord is damaged. If using battery power, replace the batteries with fresh ones. If the problem persists, consult the user manual or contact Sony support.
Yes, you can use the radio function without setting the clock. Simply press the RADIO ON button to turn on the radio and select the desired station using the TUNE/TIME SET+ or – button.
To improve radio reception, extend the antenna fully and reposition it for better signal. If you're indoors, try placing the unit near a window. Avoid interference from other electronic devices.
The incorrect time display may be due to a power interruption or incorrect initial setup. Reset the clock by pressing the CLOCK button and adjusting the time with the TUNE/TIME SET+ or – button. Ensure AM/PM is set correctly.
To adjust the display brightness, press the SNOOZE/BRIGHTNESS button repeatedly until you reach the desired brightness level. The display cycles through different brightness settings.
The backup battery in the Sony ICF-CS750 maintains the clock and alarm settings during a power outage. Ensure to replace the battery periodically to prevent loss of settings.
To switch between AM and FM modes, press the RADIO BAND button. Each press will toggle between AM and FM bands.
The Sony ICF-CS750 allows you to set two alarms. Use the ALARM A and ALARM B buttons to set and activate two different alarms at different times.
To perform a factory reset on your Sony ICF-CS750, unplug the unit and remove the backup battery. Wait for a few minutes, then reinsert the battery and plug the unit back in. This will reset the device to its default settings.