Sony ICF-CD873 Operating Instructions
![Sony ICF-CD873 manual cover](/images/9fe90e44b45e049a41e5c98e/thumbs/thumb175x175.webp)
To set the alarm, press the 'Alarm Set' button until the desired time appears on the display. Use the tuning buttons to adjust the hour and minute. Confirm by pressing the 'Alarm Set' button again.
First, ensure the disc is clean and free from scratches. If the issue persists, try resetting the unit by unplugging it for a few minutes. If it still does not work, the laser lens may need cleaning or the player may require servicing.
Yes, you can adjust the brightness by pressing the 'Display' button. Each press will cycle through the available brightness levels.
Ensure the antenna is fully extended. Try repositioning the unit for better reception. Avoid placing it near electronic devices that might cause interference.
Check that the volume is turned up and not muted. Ensure the 'Function' selector is set to the correct source and that headphones are not plugged in.
To reset the unit, unplug it from the power source, wait a few minutes, and then plug it back in. This will restore the default settings.
The Sony ICF-CD873 is powered by an AC power cord. Ensure it is connected to a standard electrical outlet.
Use a soft, dry cloth to gently wipe the exterior. For the CD lens, use a CD lens cleaner disc according to the instructions provided with the cleaner.
The Sony ICF-CD873 is not designed to play MP3 CDs. It supports standard audio CDs.
To set the time, press and hold the 'Clock' button. Use the tuning buttons to set the hour and minute. Release the 'Clock' button to save the settings.