Sony ICF-CD843V Operating Instructions
![Sony ICF-CD843V manual cover](/images/0c4bbe237b63ebaa5b7b2129/thumbs/thumb175x175.webp)
To set the alarm, press and hold the ALARM SET button until the alarm time flashes. Use the TUNE/TIME SET + or - buttons to set the desired time, then press ALARM SET again to confirm.
Ensure the disc is inserted correctly with the label side up. Clean the disc and the player’s lens if necessary. If the issue persists, try a different disc to determine if the problem is with the disc or the player itself.
For better reception, fully extend the telescopic antenna and reposition it for optimal signal clarity. Avoid placing the unit near electronic devices that may cause interference.
The Sony ICF-CD843V does not support battery operation. It must be plugged into a power outlet using the supplied AC power cord.
To clean the exterior, use a soft, dry cloth. Avoid using any abrasives, solvents, or chemical cleaners to prevent damage to the surface.
To reset the unit, unplug it from the power source and wait a few minutes before plugging it back in. This will reset the settings to factory defaults.
To change the time format, press and hold the CLOCK button while the clock is displayed. Use the TUNE/TIME SET + or - buttons to toggle between 12-hour and 24-hour formats.
Check that the volume is not set too high, as this can cause distortion. Ensure the speakers are not obstructed and try repositioning the unit away from other electronic devices.
Press the SLEEP button, then use the TUNE/TIME SET + or - buttons to select the desired sleep time duration. The unit will automatically turn off after the set time.
Ensure the unit is properly plugged in and the power is turned on. Check for any blown fuses or tripped breakers in your power source. If the problem persists, it might require professional servicing.