Sony ICF-CD823 Operating Instructions
![Sony ICF-CD823 manual cover](/images/793aede31c007aebf14dc157/thumbs/thumb175x175.webp)
To set the alarm on your Sony ICF-CD823, press the 'Alarm Set' button. Use the 'Hour' and 'Minute' buttons to adjust the time. Ensure the 'Alarm' switch is set to your desired wake-up mode (Radio or Buzzer).
Check if the CD is inserted correctly with the label side up. Ensure the CD is clean and free of scratches. Also, verify that the unit is plugged in and powered on.
Extend the FM wire antenna fully and adjust its position. For AM stations, try rotating the unit to find the best signal reception.
Yes, the Sony ICF-CD823 can be powered using 6 size C batteries for portable use. Ensure that the batteries are inserted correctly in the compartment.
Use a soft, dry cloth to gently wipe the exterior surfaces. Avoid using any chemicals or abrasive materials that might damage the unit.
Check if the brightness setting is low. Adjust the display brightness using the relevant button, or replace the backup batteries if necessary.
Ensure the volume is set to an appropriate level for the alarm. If using the radio mode, check that the station is tuned correctly to avoid static.
Unplug the radio and remove the batteries. Wait for a few minutes before reinserting the batteries and plugging the unit back in. This will reset the system.
Remove all batteries to prevent leakage and store the unit in a cool, dry place. Cover it with a cloth to avoid dust accumulation.
Press and hold the 'Clock' button. Use the 'Hour' and 'Minute' buttons to set the correct time, then release the 'Clock' button to confirm.