Sony ICF-CD814 Operating Instructions
![Sony ICF-CD814 manual cover](/images/1fc1ce505b5deb3568d4f04e/thumbs/thumb175x175.webp)
To set the alarm, press and hold the ALARM button until the hour flashes on the display. Use the TUNING + or - to set the desired hour, then press ALARM again to set the minutes. Finally, select the alarm mode by choosing radio or buzzer.
First, ensure that the disc is inserted correctly and is not scratched or dirty. Try cleaning the disc with a soft cloth. If the problem persists, check if the lens needs cleaning or if there is a mechanical issue.
To improve radio reception, extend and adjust the antenna for FM stations. For AM stations, try repositioning the unit itself. Avoid placing the radio near electronic devices that may cause interference.
Check that the volume is not set to the minimum level and that the mute function is not activated. Also, ensure that the correct source is selected and that the speakers are not damaged.
To reset the clock, press the CLOCK button and hold it until the hour digits flash. Use the TUNING + or - buttons to set the correct hour, then press CLOCK again to set the minutes.
Use a soft, dry cloth to clean the exterior of the unit. Avoid using chemical solvents or abrasive cleaners. For the CD lens, use a CD lens cleaner if necessary.
No, the Sony ICF-CD814 is designed to play standard audio CDs and does not support MP3 format CDs.
Check if the unit is plugged in and turned on. If it is, try resetting the unit by unplugging it for a few minutes and then plugging it back in. If the issue persists, the display may need servicing.
Press the RADIO BAND button to toggle between AM and FM modes. The current mode will be displayed on the screen.
To replace the backup battery, locate the battery compartment on the bottom of the unit. Open it using a screwdriver, remove the old battery, and insert a new one, ensuring the correct polarity. Close the compartment securely.