Sony ICF-C793 v2 Operating Instructions
![Sony ICF-C793 manual cover](/images/2b1e99d3e8ac19dfce60ceba/thumbs/thumb175x175.webp)
To set the alarm, press the ALARM SET button while holding down the ALARM MODE button. Use the TIME SET buttons to adjust the hour and minute. Release the buttons when done.
Ensure that the clock has been properly set. If the time is still incorrect, check if the backup battery needs replacement.
Try extending the antenna fully and repositioning it. Avoid placing the clock radio near electronic devices that may cause interference.
To change the backup battery, unplug the unit, open the battery compartment, remove the old battery, and insert a new one. Ensure the polarity is correct.
Check if the alarm is set correctly and ensure the volume is turned up. Verify that the alarm mode is not set to 'off'.
Press the BAND button to toggle between AM and FM bands. The selected band will be indicated on the display.
Yes, you can adjust the brightness by pressing the SNOOZE/BRIGHTNESS button until the desired brightness level is reached.
Unplug the unit, remove the backup battery, and leave it without power for a few minutes. Reinsert the battery and plug it back in to reset.
Ensure the antenna is fully extended and positioned away from electrical devices. Try retuning to a clearer station.
Press and hold the DST button to toggle the daylight saving time function. The display will indicate when DST is active.