Sony ICF-C414 v2 Operating Instructions
![Sony ICF-C414 manual cover](/images/7fc100e3ae0094ffe72936b8/thumbs/thumb175x175.webp)
To set the alarm, press the 'Alarm Set' button until the desired alarm time is displayed. Use the tuning buttons to adjust the hours and minutes. Confirm the time by pressing the 'Enter' button.
The display may be set to low brightness. Adjust the brightness by pressing the 'Snooze/Dimmer' button to toggle through the brightness settings.
To reset the unit, unplug it from the power source, then remove the backup battery. Wait for a few seconds and reinsert the battery. Plug the unit back in and it will reset to factory settings.
Ensure that the antenna is fully extended and positioned for optimal reception. Avoid placing the radio near electronic devices that may cause interference.
To change the backup battery, open the battery compartment cover on the bottom of the unit. Remove the old battery and insert a new one, ensuring the polarity is correct. Replace the cover securely.
Yes, you can adjust the alarm volume by rotating the volume control knob on the side of the radio while the alarm is sounding.
Press the 'Band' button to toggle between AM and FM radio bands. Use the tuning buttons to select your desired station.
Press and hold the 'Clock' button until the time flashes. Use the tuning buttons to set the hours and minutes. Press 'Enter' to confirm the time setting.
The DST (Daylight Saving Time) button automatically adjusts the clock one hour forward or backward to account for daylight saving changes.
Ensure that a fresh backup battery is installed in the unit. This will keep the clock running during power outages.