Sony ICF-C370 Operating Instructions
![Sony ICF-C370 manual cover](/images/6bec76cd919d2d422af7a20e/thumbs/thumb175x175.webp)
To set the alarm, press and hold the ALARM button. Use the TUNING dial to set the desired alarm time, then release the ALARM button to confirm.
To switch between AM and FM, use the BAND selector switch on the side of the unit. Adjust the switch to your preferred radio band.
Check if the brightness control is set correctly. Adjust the BRIGHTNESS switch to enhance display visibility or ensure the unit is connected to a power source.
Rotate the TUNING dial to manually search for and tune into your desired radio station frequency.
The Sony ICF-C370 is designed to operate on AC power. Batteries are used only for backup to maintain the clock and alarm settings in case of power failure.
Press and hold the TIME button, then use the TUNING dial to adjust the hour and minute. Release the TIME button to set the clock time.
Ensure the alarm is set correctly. Check the alarm indicator on the display and make sure the volume is turned up. Verify the alarm time settings are correct.
Extend the FM wire antenna fully and reposition it for better reception. For AM stations, rotate the entire unit to achieve optimal signal clarity.
Ensure that backup batteries are installed correctly. The batteries are necessary to keep the clock running during power interruptions.
To turn off the alarm, press the ALARM RESET button. This will deactivate the alarm until it is set again.