Sony ICF-C1PJ Operating Instructions

To set the time, press and hold the "Clock" button until the hour flashes. Use the "+" or "-" buttons to adjust the hour, then press "Clock" again to set the minutes. Adjust the minutes and press "Clock" once more to confirm.
To project the time, press the "Projector" button. Adjust the focus ring on the projector lens for a clear display. You can also tilt the projection angle using the adjustable knob to ensure it displays on your desired surface.
Ensure that the device is properly plugged into a working power outlet. Check if the power cord is securely connected to the unit. If the device still doesn't turn on, try performing a reset by unplugging it for a few minutes and then plugging it back in.
Press the "Alarm Set" button and hold it until the alarm time flashes. Use the "+" or "-" buttons to set the desired alarm time. Press "Alarm Set" again to confirm. You can also choose the alarm sound by toggling the "Alarm Mode" button.
Yes, you can listen to the radio. Press the "Radio" button to turn it on. Use the "Tuning" dial to select your desired radio station. Adjust the volume using the "Volume" buttons.
Adjust the focus ring on the projector lens to sharpen the display. Ensure the surface onto which the time is projected is at an appropriate distance for clear readability.
Press the "Snooze/Dimmer" button to cycle through the different brightness levels. Choose the one that best suits your preference or the ambient lighting conditions.
Check if the volume is turned up by pressing the "+" volume button. Ensure the radio or alarm is set to a source with available audio. If using the radio, make sure it is tuned to a station broadcasting sound.
To reset the device, unplug the power cord and remove any backup batteries. Press and hold the reset button located inside the battery compartment for a few seconds. Reinsert the batteries and plug the device back in.
Yes, you can disable the projector by pressing the "Projector" button until the projection turns off. This can conserve energy and prevent unwanted light during sleep.